What board is the best board on the steel structure?

1. Labor steel plate: This plate can be used directly, and wooden flooring or bamboo flooring can be paved above it.

　　2. Cement plate: Put the cement board on the steel structure, and then lay the floor on its surface. In this way, the noise during walking can be effectively reduced.

　　3. Compression board or large core board: These two types of plates can reduce the noise during walking to a certain extent. However, in view of the launch of the steel structure, there will be a little sound when walking.

　　4. Plastic pads, such as hollow plastic boards: The construction of this material is difficult, the construction period is short, the price is moderate, and the waterproof and anti -corrosion. The hollow structure gives it a good sound insulation effect, which is available in the range of 13-20mm thick, strong load-bearing ability, and not easy to deform or damage. In addition, this kind of pads are recyclable environmental protection materials. ‌ When the service life is over, ‌ can be regenerated through the recycling of manufacturers, ∩omutenant to realize the recycling of resources, and reduce the consumption of natural resources and the environment of the environment. pollute. Can be used for factory and large truck steel structure compartments as pads.

　　5. Wooden board integrated materials, including pine boards, large core plates, and bamboo plywood integrated materials: When using these plates, you need to pay attention. The wooden board integrated material should not be deformed and the size is standard, and the price is slightly higher than other plates. The tide of pine boards can easily lead to deformation. The large core board is not environmentally friendly. Bamboo tape can also be used, but after a few years of use, the problem of torment cracking may occur. In general, which method to choose to lay the floor needs to be based on the specifics of the attic